Daughter’s First Birthday Outfit!

img_1777-version-2

Has it really been 3 months since my last post?  CRAZY!  A lot has happened in 3 months!  I won’t bore you with all the details however, one very special event for our family was my daughter’s first birthday.  I had a lot of fun sewing up a few outfits and decorations for a little photoshoot and for her small party with family.  I also made a coordinating outfit for her bunny!  Since having our baby girl, sewing has been such a great way to relax after she goes to bed…or after she’s awake from 2am to 3am and I’m wide awake and need something to do.

img_1526

For the bunting, I used a FREE bunting pattern here.  I wanted to make it as quick as possible so I just cut out the triangles (for the pink one I used the 6″ triangle and for the purple I used the 4″ triangle) and kept the edges raw.  On the back of each triangle I put a 1/2″ strip of fusible interfacing along the top edge to decrease any puckering in the fabric.  After that, I wedged the triangles in-between a long piece of bias tape and sewed a straight line all the way across the tape.  Done.  Super easy!

For the diaper cover I used an awesome free pattern from MADE Everyday.  You can find the video tutorial here.

I purchased the plain white bib from Carter’s (it came in a pack of 5) and then I appliquéd it!  I applied “heat n’ bond” to the wrong side of the fabric and cut out my desired shapes.  After fusing the shapes to the bib, I sewed around the edges of the fabric to secure them in place.  You can find a tutorial that explains this process in detail here.

For the skirt I used another fabulous MADE Everyday tutorial which you can find here.  I did a rolled hem on each layer of the skirt with my serger.

fullsizerender

The plain white onesies were purchased at Wal-Mart (they came in packages of 2).  I used Premie Size for the bunny and size 3-6 months for my teeny tiny daughter!  I appliquéd the cupcakes to the onesies.

I used a simple yet cute headband tutorial from Create Kids Couture.  You can find it here.

I LOVED how it all turned out however, the appliqué only lasted for the day!  The edges of the fabric frayed!  Luckily, I only really needed the outfit for one day so it didn’t really matter.  Next time, I’ll need to use a zig zag/satin stitch instead of a straight stitch to secure the appliquéd pieces to the bib and onesies.

Until next time,

-AFriendLikeBen-

 

Easy Owl Pillow Tutorial

owl pillow watermarked

Our good friends from out of town were coming over for a visit and they have an adorable little girl!  I wanted to give her little something so I whipped up this cute owl pillow in no time.  I used fabric I already had and used this great FREE pattern from “We All Sew.”  (Thankyou!)

As per usual, I didn’t follow the pattern exactly!  I didn’t include a centre strip (because I didn’t have much time!) and I dislike “raw edges” in appliqué, so I used an “appliqué without raw edges” technique that involves sewing two appliqué pieces right sides together and turning them right side out.  If you’d like to learn more, keep scrolling!

First, download and cut out the pattern pieces.  You can find the pattern pieces here.

image

Pin the pieces to your chosen fabrics and cut out.

With my “appliqué without raw edges” technique, I had to cut out double of the eye, beak and wing pieces with an extra 1/4″ seam allowance.   So in total…I have 2 main body pieces, 1 bodice piece, 4 feet pieces, 4 wing pieces, 4 large eye circles, 4 small circles and 2 beak pieces.

image_1

Using one of the large eye circles as an example, I have demonstrated the “appliqué without raw edges” technique I used below!

Sew 2 large circles, right sides together all the way around.  Do not leave an opening.

image_4

Trim the seam allowance to be a scant 1/4″ and cut little slits around the edge being careful not to cut through the stitches.  (This helps the fabric lay flat when turning the piece right side out.)

image_5

Choose which side of the piece will be the back and cut a slit in the centre (again, being careful not to cut too close to the stitching.)

image_7

Turn the piece right side out through the slit you just cut and press with a hot iron.  Although not a perfect circle, the edges are nice and clean and it’s ready to be sewn to the owl!

image_8

Continue this technique with the other eye circles, beak and wings.  (*note: for the wings, I only sewed the inside edge, right sides together.)

image_2

image

When all the pieces are prepped, you’re ready to assemble the owl.

Start by folding under the top edge of the bodice piece and sew into place.

image_2

Place the wings on top.  Pin in place and sew the inside edge of the wing with 1/4″ seam allowance. (I like using my 1/4″ seam foot for a clean line.)

image_3

image_4

Now, add on the face.

First, place the beak on the owl face.  Because the piece is small, I used a tiny dab of school glue to hold it instead of pins.

So….Dab the glue…

image_6

press in place with a hot iron…

image_8

Sew it to the owl with a 1/4″ seam.

image_9

The white part of the eye was big enough to use a pin for placement.  For the black part, I used the glue technique again.

image_1

Once the face is applied, add the feet!

Sew the feet, right sides together, turn and pin the raw edge of the feet to the raw edge of the owl’s body.  (I was running out of time so I didn’t stuff the feet but they’d look cute stuffed too!)

image_6

Place the back piece of the owl body over top and pin the layers together.  (I used “wonder clips” – they are so great to use when you’re trying to pin layers of fabric together quickly.)  Sew with 1/2″ seam allowance leaving a 3″ opening for turning.

image_7

image_9

Turn project right side out and press.  Stuff owl to desired puffiness through the opening you left.

image_1

Hand stitch the opening closed using a ladder stitch and you’re done!

image_6

Voila!  A quick and easy, one-of-a-kind owl!  Let me know if you give it a try or have any tips or tricks.

Happy Sewing!

-AFriendLikeBen-